Using The Favorite Key - YOKOGAWA Daqstation DX1000N User Manual

3.7

Using the Favorite Key

IM 04L41B01-03E
For details on the setup screen, settings, and operating procedures, see section 5.15 in
the DX1000/DX1000N User's Manual and section 5.16 in the DX2000 User's Manual.
When You Set Action to Favorite
• You can register displays from both batch overview mode and batch single mode to
the favorite key.
• If you register the historical trend's alarm summary or message summary displays to
the favorite key, register them so that they come after the historical trend display. If
any other screen is registered before them, the DX shows the historical trend display
instead of the alarm summary or message summary displays.
• If, due to changes to the DX's settings after you register a display to the favorite key,
the batch group number or display group number registered no longer exists, the DX
shows the display belonging to the smallest available display group number of the
smallest available batch group number.
When You Set Action to History
Mode Action
Batch overview Does not switch to the historical trend display with the currently displayed
mode data. Note that the DX does not display an error message.
Batch single mode Switches to the historical trend display for the currently displayed batch
group.
1
2
3
Index
3-15