Advertisement
USER GUIDE //
STRETCHER SUPPORT PB-420 SERIES
Review 01/15
03
OPERATION
03.4
Scoop stretcher fastening
FOR MODELS
PB-420
FIXING
To place PC 335 and PC 337 scoop stretchers, slide the scoop
stretcher face down, between the stretcher anchor sheet
and the tray until it butts with clamp grippers.
Once contact is made, securely tighten it until it affi xed.
EXTRACTING
To extract the scoop stretcher, pull it hard until it is unlat-
ched from the clamp grippers.
For your convenience, we recommend to take the stretcher
by the roller to use more force.
03.5
Spine board fastening
FOR MODEL
PB-420/4
FIXING
To place the scoop stretcher, slide it face down, between the
stretcher anchor sheet and the tray until it butts with clamp
grippers. Once contact is made, securely tighten it until it
affi xed.
To save the spine board it should be located into the lower
housing and fi xed throught Velcro tape for this purpose.
EXTRACTING
To extract the scoop stretcher, pull it hard until it is unlat-
ched from the clamp grippers.
For your convenience, we recommend to take the stretcher
by the roller to use more force.
You can move the spine board away by untying fastening
velcro tapes.
24
•
•
PB-420/2
PB-420/4
Advertisement
