Nm (14.8 Lbf Ft); (11.1 Lbf Ft) - KTM 250 EXC-F EU Owner's Manual

SERVICE WORK ON THE CHASSIS
–
Position the upper triple clamp with the steering.
–
Mount screw
–
Position the clutch line, wiring harness and CDI control unit. Mount and tighten
screws .

Guideline
Remaining screws, chassis
500149-11
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
100888-11
–
Fully tighten screws
Guideline
Screw, bottom triple clamp
100887-12
–
Tighten screw
Guideline
Screw, top steering head
100889-10
–
Tighten screw
Guideline
Screw, top steering stem
100890-10
–
Fully tighten screws
Guideline
Screw, top triple clamp
100887-13
but do not tighten yet.

toward the front.

.

.

.

.

M6 10 Nm (7.4 lbf ft)
M8 15 Nm

(11.1 lbf ft)

M20x1.5 10 Nm (7.4 lbf ft)
M8 20 Nm
(14.8 lbf ft)
M8 20 Nm
(14.8 lbf ft)
48