Table of Contents
Advertisement
Section 5: Maintenance & Lubrication
Section 5: Maintenance & Lubrication
Maintenance
Proper servicing and adjustments are key to the long life
of any implement. With careful inspection and routine
maintenance, you can avoid costly downtime and repair.
Check all bolts after using the unit for several hours to be
sure they are tight. Replace any worn, damaged, or
illegible safety labels by obtaining new labels from your
Land Pride dealer.
!
DANGER
To avoid serious injury or death:
•
Always disconnect driveline from power take-off shaft
before servicing underside of cutter. The tractor can be
started with power take-off engaged.
•
Always secure equipment with solid, non-concrete supports
before working under it. Never go under equipment
supported by concrete blocks or hydraulics. Concrete can
break, hydraulic lines can burst, and/or hydraulic controls
can be actuated even when power to hydraulics is off.
!
WARNING
To avoid serious injury or death:
•
Do not operate cutter with blades that are out-of-balance,
bent, excessively worn, excessively nicked, or with blade
bolts that are excessively worn. Such blades can break loose
at high speeds.
Do not attempt to straighten a bent blade or weld on a
•
blade. Do not attempt to modify a blade such as hard
surfacing, heat treating, cold treating, or by any other
method. Always replace blades with new Land Pride blades
to assure safety.
•
Do not alter implement or replace parts on the implement
with other brands. Other brands may not fit properly or
meet OEM (Original Equipment Manufacturer)
specifications. They can weaken the integrity and impair the
safety, function, performance, and life of the implement.
Replace parts only with genuine OEM parts.
•
Buildup of debris around moving components and
gearboxes is a fire hazard. Keep rotating parts and
gearboxes free from debris to avoid serious injury and
property damage.
•
Improper oil level can cause bearing failure and be a fire
hazard. Maintain proper gearbox oil level to avoid serious
injury and property damage.
11/12/18
Table of Contents
26646
Use 1-11/16" Socket Wrench
On Blade Nut (#3)
Land Pride Cutter Blade Parts
Item Part No.
318-586A
1
802-277C BLADE BOLT 1 1/8-12 x 3 7/16 WITH KEY
2
804-147C
3
803-170C
4
312-388H
5
840-273C PLUG LP 3" ID RUBBER
6
820-138C
Part Description
BLADE BOLT KIT
(Includes items 1, 2, & 3 below)
WASHER FLAT 1 HARD ASTMF436
NUT HEX TOP LOCK 1 1/8-12 PLATE
27 OVAL DISHPAN WELDMENT (OMNI)
CUTTER BLADE 1/2 x 4 x 31 CCW
Cutter Blade Assembly
Figure 5-1
RCR1884 Model Rotary Cutter 312-880M
25
Advertisement
Table of Contents
