Land Pride RCR1884 Operator's Manual page 12

Introduction
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this Rotary Cutter.
Application
Land Pride's RCR1884 Model Rotary Cutter is built and
designed by Land Pride for cutting on gentle slopes or
slightly contoured right-of-ways, pastures, around the
farm or around town. The 84" cutting width is compatible
with maneuverable 45 to 90 horsepower tractors with
540 rpm power take-off speed. The cutter has a Category
I and Category II three-point hitch and is Quick-Hitch
compatible. It is offered with a standard ASAE Category 4
driveline with slip-clutch protection and a single or dual
rear laminated tailwheel.
The RCR1884 cutter cuts through grass, weeds, and light
brush up to 2" in diameter with a cutting height range of 2"
to 11". Cutting blade tip speed is
10 ga. (.135" thick) oval pan stump jumper and welded on
full length skid shoes. A rear metal band shield is
standard equipment. Optional shields are front rubber
guard, front chain guard, and rear chain guard.
See "Specifications & Capacities" on page 31 and
"Features & Benefits" on page 33 for additional
information and performance enhancing options.
Using This Manual
•
This Operator's Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator's or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
"Right" or "Left" as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions:
IMPORTANT: A special point of information related
to the following topic. Land Pride's intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.
8
RCR1884 Model Rotary Cutter 312-880M
Table of Contents
rpm. It includes a
17,113
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS 67402-5060
E-mail address
lpservicedept@landpride.com
30839
11/12/18