Front Guard Assembly - Land Pride RCR1884 Operator's Manual

Section 1: Assembly & Set-Up

Front Guard Assembly

!
DANGER
To avoid serious injury or death:
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front and rear safety guards is
mandatory with this cutter. Stop blade rotation if a bystander
is in or around the area.
!
WARNING
To avoid serious injury or death:
Keep all safety guards in place. Rotary Cutters have the
ability to discharge objects at high speeds. Use extreme
caution when cutting in areas where people may be present. It
is best to operate the cutter when no one is nearby. Stop blade
rotation if someone is in or around the area.
Front Rubber Guard Installation
Refer to Figure 1-12:
1. Install center rubber guard (#5) with 3/8" x 1" long
carriage bolts (#4). Secure with 3/8" flange nuts (#3).
2. Install left and right side rubber guards (#2) with
3/8" x 1" long carriage bolts (#4). Secure with
3/8" flange nuts (#3).
3. Tighten all 3/8" flange nuts (#2) to 31 ft-lbs. as
indicated in the "Torque Values Chart" on page 35.
Front Chain Guard Installation (Optional)
Refer to Figure 1-13:
1. Install center chain guard (#1) with 3/8" x 1" long
carriage bolts (#4). Secure with 3/8" flange nuts (#3).
2. Install left and right chain guards (#2) with 3/8" x 1"
long carriage bolts (#4). Secure with 3/8" flange nuts
(#3).
3. Tighten all 3/8" flange nuts (#2) to 31 ft-lbs. as
indicated in the "Torque Values Chart" on page 35.
16
RCR1884 Model Rotary Cutter 312-880M
Table of Contents
24656
24657
Front Rubber Guard
Figure 1-12
Front Chain Guard
Figure 1-13
11/12/18