Land Pride RCR1884 Operator's Manual
  1. Manuals
  2. Brands
  3. Land Pride Manuals
  4. Lawn Mower Accessories
  5. Rotary Cutters RCR1884
  6. Operator's manual
Land Pride RCR1884 Operator's Manual

Land Pride RCR1884 Operator's Manual

Rcr1884 model rotary cutter 312-880m
Hide thumbs Also See for RCR1884:
Table of Contents

Advertisement

Quick Links

Download this manual
Rotary Cutter
RCR1884 Model
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
312-880M
Operator's Manual
Printed 11/12/18
24584

Advertisement

Table of Contents
loading

Related Manuals for Land Pride RCR1884

Summary of Contents for Land Pride RCR1884

  • Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 11/12/18...
  • Page 2 Model Number Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov RCR1884 Model Rotary Cutter 312-880M 11/12/18...

  • Page 3: Table Of Contents

    Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. RCR1884 Model Rotary Cutter 312-880M 11/12/18...
  • Page 5  Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
  • Page 6  Lower implement to the ground and  Replace parts on this implement implement. follow all shutdown procedures with genuine Land Pride parts only.  Attach the chain to the tractor before leaving the operator’s seat to Do not alter this implement in a way drawbar support or other specified perform maintenance.
  • Page 7 Use Seat Belt and ROPS signals are recommended Keep Riders Off whenever driving on public roads. Machinery  Land Pride recommends the use of a CAB or roll-over-protective-  Never carry riders on tractor or structures (ROPS) and seat belt implement.
  • Page 8 Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
  • Page 9 Table of Contents Important Safety Information 818-552C Danger: Rotating Driveline 24597 818-540C Danger: Guard Missing 24597 818-142C Danger: Rotating Driveline 24584 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 10 Table of Contents Important Safety Information 24584 818-556C Danger: Thrown Object 24584 818-564C Danger: Rotating Blades 838-614C 2" x 9" Red Reflector (2 places) 24652 RCR1884 Model Rotary Cutter 312-880M 11/12/18...
  • Page 11 Table of Contents Important Safety Information 24584 818-830C Safety Combo 818-130C Caution: 540 rpm 24584 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 12 Table of Contents Introduction Introduction Owner Assistance Land Pride welcomes you to the growing family of new product owners. This Rotary Cutter has been designed The dealer should complete the Online Warranty with care and built by skilled workers using quality Registration at the time of purchase.
  • Page 13 45 to 90 horsepower Cat. l 3-point hitch. You can order the bushings from you • Category I or II Quick-Hitch nearest Land Pride dealer. Two are required when • 540 rpm 1 3/8"-6 spline rear power take-off (power ordering.
  • Page 14 If they are too stiff to rotate, loosen nut (#8) Floating top hitch (#13) must be installed with until it rotates freely. ears (#5) above rear brace bars (#3). 24654 3-Point Hitch Assembly Figure 1-3 RCR1884 Model Rotary Cutter 312-880M 11/12/18...
  • Page 15 The power take-off shaft and gearbox input shaft must be aligned and level with each other when 9. Continue with “Tractor Hook-Up” on page 12. checking driveline minimum length. A driveline that is too long can damage tractor and implement. 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 16 Consult your tractor Operator’s Manual to determine proper instructions. weight requirements and maximum weight limitations. NOTE: Land Pride’s Quick Hitch can be attached to the tractor to provide quick and easy 3-point hook- up and detachment. See your nearest Land Pride dealer to purchase a Quick-Hitch.

  • Page 17: Shorten Driveline

    8. Apply multi-purpose grease to the inside of the outer hitch and a standard 3-point hitch. More than one shaft and reassemble driveline. driveline may be required to fit all applications. 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 18 35 for correct torques. brackets (#3 & #4) with two 1/2" -13 x 1 1/2" GR5 hex head bolts (#5) and 1/2" flange locknuts (#8). Tailwheel Deck Bracket 24655 Single Tailwheel Assembly Figure 1-10 RCR1884 Model Rotary Cutter 312-880M 11/12/18...
  • Page 19 8. Refer to “Dual Tail Wheel Height Adjustment” on rear chain guards are included and front mounting page 19 for adjusting instructions. holes when rear chain guards are not included. 24665 Dual Tailwheel Assembly Figure 1-11 11/12/18 RCR1884 Model Rotary Cutter 312-880M...

  • Page 20: Front Guard Assembly

    (#4). Secure with 3/8" flange nuts (#3). 3. Tighten all 3/8" flange nuts (#2) to 31 ft-lbs. as indicated in the “Torque Values Chart” on page 35. 24657 Front Chain Guard Figure 1-13 RCR1884 Model Rotary Cutter 312-880M 11/12/18...

  • Page 21: Rear Guard Assembly

    1/2"-13 x 1 1/2" GR5 carriage bolts (#7) and 1/2" whiz nuts (#8) as shown. Tighten all 1/2" nuts (#8 & #9) to 76 ft-lbs. as indicated in the “Torque Values Chart” on 24659 page 35. Rear Chain Guard Figure 1-15 11/12/18 RCR1884 Model Rotary Cutter 312-880M...

  • Page 22: Section 2: Adjustments

    3-point clevis pin is straight above the lower 3- slightly lower at the front (approximately 1" lower) point hitch pins. This arrangement allows for than at the back. optimum ground contour following performance. RCR1884 Model Rotary Cutter 312-880M 11/12/18...

  • Page 23: Single Tail Wheel Height Adjustment

    Dual Tailwheel Height Adjustment Figure 2-4 For best cutting efficiency, adjust the lower 3-point arm height such that the front cutter blade is approximately 1" lower than the rear cutter blade. 24661 Nominal Cutting Height Figure 2-5 11/12/18 RCR1884 Model Rotary Cutter 312-880M...

  • Page 24: Section 3: Operating Instructions

    Always disconnect driveline from power take-off shaft • hazard. Maintain proper gearbox oil level to avoid serious before servicing underside of cutter. The tractor can be injury and property damage. started with power take-off engaged. RCR1884 Model Rotary Cutter 312-880M 11/12/18...

  • Page 25: Inspection Of Tractor & Cutter

    The remaining inspections are made by engaging the 5. Shift tractor to a lower gear when traveling over rough power take-off to check for vibrations. or hilly terrain. 11/12/18 RCR1884 Model Rotary Cutter 312-880M...

  • Page 26: Blade Engagement & Disengagement

    Frequently inspect cutter for loose bolts and nuts. driveline in storage hook. Tighten all loose bolts and nuts as indicated in the “Torque Values Chart” on page 35. 8. For additional information, see “General Operating Instructions” on page 23. RCR1884 Model Rotary Cutter 312-880M 11/12/18...

  • Page 27: General Operating Instructions

    With a little practice you will be driveline bind or chatter. Lower the cutter to the ground, pleased with what you and your Land Pride Rotary Cutter return the engine to a low idle, and disengage the power can do.
  • Page 28 Stop blade rotation if someone is in or around the area. Land Pride offers two types of front guards to best suit your application. They are the rubber skirt guard and chain skirt guard.
  • Page 29 • blade. Do not attempt to modify a blade such as hard surfacing, heat treating, cold treating, or by any other method. Always replace blades with new Land Pride blades to assure safety. • Do not alter implement or replace parts on the implement with other brands.
  • Page 30 8. Carefully check cutting edges of blades in relation to blade carrier rotation to ensure correct blade placement. Blade rotation is counterclockwise with cutting edge leading. Airfoil (lift) must be oriented towards the top of the deck. RCR1884 Model Rotary Cutter 312-880M 11/12/18...
  • Page 31 Slippage has not occurred if any two marks on the friction disc and plate are still aligned. IMPORTANT: If clutch run-in procedure indicated that one or more friction disks did not slip, the clutch must be disassembled to separate the friction discs. 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 32 4. Repaint parts where paint is worn or scratched to prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. Paint is also available in touch-up bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.
  • Page 33 Hours Driveline Profiles Type of Lubrication: Multi-purpose Grease Quantity = Clean & coat the inner tube of the driveline with a light film of grease and then reassemble. 14618 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 34 The hub should be greased until grease purges from the relief hole. Type of Lubrication: Multi-purpose Grease 24652 Quantity = Until grease purges from the relief hole RCR1884 Model Rotary Cutter 312-880M 11/12/18...
  • Page 35 Slip Clutch Tailwheel Mount Assembly Welded arm and Caster Fork Tailwheel 4" x 8" x 15" Laminated Tire Front Guard Optional: Rubber Guard or Chain Guard Rear Guard Standard: Metal Band Optional: Chain Guard 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 36 Table of Contents Section 5: Specifications & Capacities 27738 RCR1884 Model Rotary Cutter 312-880M 11/12/18...
  • Page 37 RCR1884 Model Features Benefits Surpassed rugged All Land Pride Rotary Cutters have been designed and tested and meet rigorous industry standards voluntary testing procedures specified by ANSI. 90 Hp gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.
  • Page 38 Driveline bent Replace driveline Blades loose Tighten blade bolts Blade carrier bent Replace blade carrier Blade broken Replace blade Blade will not swing Remove and inspect blade Blades have unequal weight Replace both blades RCR1884 Model Rotary Cutter 312-880M 11/12/18...
  • Page 39 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. Additional Torque Values Blade Bolt Locknut 450 ft-lbs Blade Carrier Hub Nut 450 ft-lbs Minimum 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 40 This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items such as blades, belts, tines, etc. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
  • Page 41 Table of Contents Section 9: Warranty 11/12/18 RCR1884 Model Rotary Cutter 312-880M...
  • Page 42 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

Table of Contents