Installation Instructions; Construction; Accessories; Unpacking - Hoshizaki DSM-12DE Instruction Manual

Shuttle ice dispenser
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
I. INSTALLATION INSTRUCTIONS

1. CONSTRUCTION

2. ACCESSORIES

Instruction Manual
Inlet Hose
Drain Hose
Rc1/2-G3/4 Nipple

3. UNPACKING

Children should not be allowed in reach of the packaging elements (plastic bags and expanded polystyrene) as they are
potential sources of danger.
Do not lift or manoeuvre the carton by using the shipping bands.
When moving the unit by hand, hold the unit bottom.
Always wear protective gloves when carrying the unit.
Remove shipping carton, tape(s) and packing. If packing material is left in the ice dispenser, it will not work properly.
To prevent damage, do not tilt the ice dispenser more than 45°.
1) After removing the packaging, make sure that the ice dispenser is in good condition. If in doubt, please do not use the ice
dispenser but apply to professionally qualified personnel.
2) Remove the package of accessories. Check the contents according to "2. ACCESSORIES".
3) Remove the tapes holding the power cord.
Front Panel
Grille
Air Filter
1
1
1
1
Instruction
Manual
Inlet Hose
Drain Hose
WARNING
CAUTION
NOTICE
3
ENGLISH
Push Button
Spout
Power Cord
Rc1/2-G3/4
Nipple

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents