Digi One IA User Manual page 27

8. When you complete configuration changes, choose Sub-
Configuring Advanced Functions
• Provide the IP address of the server or other device to
which the connection should be made.
• Specify the TCP port number for connections. The port
number depends on the conventions used on the
remote server or device. The following table provides
common TCP port numbering conventions. However,
the remote device may not use these conventions:
Connection Type
Telnet
Rlogin
Reverse Telnet to the port of a Digi
device server
Raw connection to the port of a
Digi device server
• Specify a service to use for the connection.
• Specify other options as required. Use the online help
for information on configuration fields. One option,
Force DCD should be specified only in the following
circumstances: (1) You want the connection up all the
time. (2) The Device type specified on the Port Config-
uration page is Modem in.
mit to commit the configuration.
Chapter 4
Common TCP
Port
23
513
2001
2101
27