Upgrading POST Code
This procedure shows you how to upgrade POST code using
HTTP or TFTP. Typically, POST upgrades are not required
and should only be done if the firmware release notes
indicate that this step is required.
Prerequisite
This procedure assumes that:
•
•
Procedure
1. Open a web browser and enter the device server's IP
2. When the device server prompts you to log in, enter the
3. Choose Admin > Upgrade from the main menu.
4. Follow the prompts.
36
Note:
HTTP, which simply requires a web browser, is the preferred
method, and Digi recommends it. TFTP, however, is often
used in UNIX environments, so TFTP is supported as well.
You have already downloaded the firmware file from the
Digi web site
TFTP is running (if you are using the TFTP option)
address in the URL window.
following:
•
root as the user name
•
The root password. The default is dbps.
Chapter 5
Upgrading POST Code