Table of Contents
Advertisement
2.3 Personal protective equipment
Description of Personal Protective
Gear
2.4 Basic hazards
2.5 Signs
METIS Vision MV05 / MV09 Rugged Thermovision Camera
Personal protective gear protects the personnel from dangers for
health and life.
Protective gear required is shown in the respective chapters of this
manual. The operating company may have additional requirements
to ensure the safety of the personnel.
Comply with the signs in the work area for requirements for
protective gear.
Protective work clothing
Protective work clothing is tight-fitting work clothing with low re-
sistance to tearing, with tight sleeves, and without projecting parts. It
is primarily used to protect against entanglement by moving machine
parts. Do not wear rings, chains, or other jewellery.
Safety footwear
Safety footwear is used for protection against heavy falling parts and
protection against slipping on slippery substrates.
Residual risks that can emanate from the device are cited in the fol-
lowing section.
Comply with the safety instructions listed here and the warning in-
structions in the other sections of this manual to reduce health haz-
ards and to avoid dangerous situations.
The following symbol is on the device.
WARNING!
Danger of injury due to illegible symbols!
-
Always keep the warning in legible condition.
-
Replace a damaged sticker without delay.
Over time stickers and signs can get dirty or in some
other manner become illegible, so that dangers cannot
be recognized and necessary operating instructions
cannot be followed. Thus an injury hazard occurs.
9
Advertisement
Table of Contents
