Limitation Of Liability; Copyright - Process Sensors METIS Vision MV05 Assembly And Installation Instructions Manual

Symbols in this manual

1.3 Limitation of liability

All information and instructions in this
operating manual have been provided
under due consideration of applicable
guidelines, the state of art, as well as
our many years of experience.

1.4 Copyright

METIS Vision MV05 / MV09 Rugged Thermovision Camera
The following symbols and indicators are used to identify handling
instructions, descriptions of results, lists, references, and other ele-
ments in this manual:
Symbol Explanation

Identifies step-by-step handling instructions.

Identifies a status or an automatic sequence as the
result of an action step.
Indicates references to sections of this manual and to
other applicable documents.
Identifies listings and list entries without a specified
sequence.
[Button] Identifies designations of buttons, keys, and other
control elements.
The manufacturer assumes no liability for damage due to:

Failure to comply with all the information in this manual

Non-intended use

Deployment of untrained personnel

Unauthorized conversions or technical changes that are not
authorized by the manufacturer

Use of non-approved spare parts
Please note that the scope of supply shown in the following descrip-
tion may vary in case the Thermovision Camera will be supplied with
customized solutions, additional options or due to necessary changes
in the interest of technological progress.
The agreed obligations in the delivery contract, the general terms and
conditions, as well as delivery conditions of the manufacturer, and the
statutory regulations valid at the time the contract was concluded,
apply.
This manual is protected by copyright.
Delivery of the operating manual to third parties, duplication in any
form - including excerpts - as well as exploitation and /or communica-
tion of the content, are not permitted except for internal use without
written approval from Process Sensors Corporation ("manufacturer").
Infringement makes damage compensation mandatory. The manufac-
turer reserves the right to enforce additional claims.
5