Table of Contents
Advertisement
6
Transport, packaging, and storage
6.1 Transport inspection
6.2 Packaging
About the packaging
Handling packaging materials
METIS Vision MV05 / MV09 Rugged Thermovision Camera
The listed accessories can be purchased directly from
the manufacturer.
Check the delivery immediately upon receipt to ensure that it is com-
plete, and to identify any transport damage.
Proceed as follows if there is apparent external damage:
Do not accept the delivery, or only accept it with reservation.
Note the extent of transport damage on the transport documents or
on the transport company's delivery ticket.
Submit a complaint.
Report any defect as soon as it is detected. Claims for
damage compensation can only be enforced during the
applicable periods for giving notice of lack of conformity.
Individual packages are packed in a cardboard box suitable for the
expected transport conditions. Environmentally-friendly materials have
been used exclusively for the packaging.
Packaging should protect the device from transport damage, corro-
sion, and other damage until installation. Therefore do not destroy the
packaging; only remove it just before installation.
Dispose of packaging materials in accordance with the respectively
valid statutory regulations and local guidelines.
NOTICE!
Improper disposal poses an environmental hazard!
-
Dispose of packaging materials in an environmentally
responsible manner.
-
Comply with locally applicable disposal guidelines. If
necessary commission a specialized company to
dispose of packaging.
Packaging materials are valuable raw materials and in
many cases they can be reused, or they can be
effectively treated and recycled. Improper disposal of
packaging materials causes environmental hazards.
18
Advertisement
Table of Contents
