Intended Use; Customer's Responsibility - Process Sensors METIS Vision MV05 Assembly And Installation Instructions Manual

2.1 Intended use

2.2 Customer's responsibility

Customer
Responsibilities of the customer
METIS Vision MV05 / MV09 Rugged Thermovision Camera
The device has been designed and constructed exclusively for the
intended use described here.
The Thermovision Camera has been designed exclusively
for remote contactless temperature measurement in the
industrial sector (e.g. automation systems). Only operate the
device within the measuring range specified in the technical

Chapter 3.4 "Performance values" on page 11) and
data (
under the permissible operating conditions (
"Operating conditions" on page 12).
Intended use also includes compliance with all the instructions in this
manual.
Any use that exceeds or is different from the specified intended use is
considered to be misuse.
WARNING!
Danger due to misuse!
Misuse of the Thermovision Camera can cause
dangerous situations.
- Do not use the Thermovision Camera under
impermissible operating conditions.
Claims of any type due to damage arising from misuse are excluded.
The customer is the person or entity that operates the device him-
self/itself for commercial or economic purposes, or who transfers the
device to a third person for use/application, and who bears the legal
responsibility for protecting the user, personnel, or third parties.
The device is used commercially. Consequently the owner of the de-
vice is subject to legal industrial safety obligations.
In addition to the safety instructions in this manual, the valid safety
and accident protection guidelines, and environmental protection
guidelines must be complied with for the area of implementation of the
device.
Particularly in this regard:

The customer must clearly regulate and specify responsibilities for
installation, operation, maintenance, and cleaning.

The customer must ensure that all employees who handle the
device have read and understood this manual.

The customer must ensure that the maintenance intervals
described in this operating manual are observed.

Chapter 3.6
7