9.2 Calibrating the camera
10 Disposal
METIS Vision MV05 / MV09 Rugged Thermovision Camera
Personnel:
Specialized personnel
When using an air purge accessory prevents
condensation and a longer cleaning interval applies.
Interval: Depends on local conditions
1.
Clean the window with a soft cloth or cotton swab and a little ethyl
alcohol.
For measurement accuracy, the thermovision camera must be re-
calibrated regularly with the aid of infrared radiation calibration
sources.
Personnel:
Manufacturer
Interval: Yearly
At the end of the device's service life the device must be disposed of
in an environmentally responsible manner.
NOTICE!
Improper disposal poses an environmental hazard!
-
Have approved, specialized companies dispose of
electrical scrap and electronic components or send
them to the manufacturer for disposal.
-
If in doubt obtain information on environmental
disposal from the local municipal authority or from
specialized disposal companies.
Improper disposal causes environmental hazards.
33