Removing The Crimping / Pressing Jaws; Fitting The Adapter Jaws And Pressing Ring; Removing The Pressing Ring And Adapter Jaws - Hilti NPR 032 PE-A22 Operating Instructions Manual

5.7

Removing the crimping / pressing jaws

WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before fitting, changing or removing the crimping / pressing jaws.
1. Remove the battery and rotate the crimping / pressing head into the outset position.
2. Press the locking pins.
3. Rotate the locking pins counterclockwise as far as they will go.
4. Pull out the locking pins.
5. Work the crimping jaws forward and out of the product.
5.8

Fitting the adapter jaws and pressing ring

WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before fitting, changing or removing the crimping / pressing jaws.
To ensure correct crimping and reliable and safe operation, use only the crimping rings approved by
the system provider and/or machine manufacturer.
1. Remove the battery.
2. Press the locking pins.
3. Rotate the locking pins counterclockwise as far as they will go.
4. Pull out the locking pins.
5. Fit the adapter jaws.
6. Push the locking pins in until they engage.
7. Bring the pressing ring into position on the fitting to be pressed.
8. Close the pressing ring.
5.9

Removing the pressing ring and adapter jaws

WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before fitting, changing or removing the crimping / pressing jaws.
1. Open the pressing ring.
2. Remove the pressing ring.
3. Remove the battery.
4. Press the locking pins.
5. Rotate the locking pins counterclockwise as far as they will go.
6. Pull out the locking pins.
12 English
Printed: 29.10.2018 | Doc-Nr: PUB / 5436899 / 000 / 01