Extending The Stroke - Hilti NPR 032 PE-A22 Operating Instructions Manual

1. Fit the crimping / pressing jaws.
2. Insert the battery.
3. Press and hold down the control switch until the piston is just short of the crimping jaws.
4. Release the control switch.
➥ The piston stops.
5. Press the pin on the tubular guard.
6. Push the tubular guard to the desired position until the pin engages.
➥ The piston retracts only as far as the selected position.
5.5.2

Extending the stroke

WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before inserting the crimping jaws.
1. Fit the crimping / pressing jaws.
2. Insert the battery.
3. Press the pin on the tubular guard.
4. Push the tubular guard to the desired position until the pin engages.
➥ When you press the return button the piston retracts to the selected position.
10 English
Printed: 29.10.2018 | Doc-Nr: PUB / 5436899 / 000 / 01