Set Countdown - UTStarcom C1100 User Manual

The countdown annunciator
the countdown expires
If the phone is off when the countdown expires, nothing will be
displayed when the phone is powered back on. The countdown
annunciator is removed from the screen
When the countdown expires and if a call is ongoing, a simple tone is
played through the earpiece or earphone (whichever the voice channel
is playing through) instead of the assigned ring tone. The simple tone
will be repeated once
When the keypad is locked, you still can press the left soft key
(Dismiss) or to silence the ring tone and dismiss the note

11.3.1 Set Countdown

There are two cases of setting the countdown function:
11.3.1.1 When Countdown Value is Zero
If the countdown value was never set, or the timer value has been reset,
the initial countdown value is zero. In this case, to set the countdown
function:
1. After accessing the Clock application, select Countdown
2. Press the right soft key
to play when the countdown time has elapsed
- Press to highlight a ring tone and press
selection. The currently selected value is indicated by a check mark
- If you do not set the ring tone, the default ring tone "Bells" is used
3. Press the left soft key (Set) to set the countdown duration. Key in
the countdown duration in hh:mm:ss format
- The maximum duration that can be entered for a countdown is
99:59:59 (99 hours, 59 minutes, 59 seconds)
Clock Application
is removed from the display when
(Ring Tone) to assign a custom ring tone
to confirm the
77