Countdown - UTStarcom C1100 User Manual

Clock Application
1. After accessing the clock application, select Timer
2. If the timer is stopped or has a zero value, press the left soft key
(Start) or to start the timer. The left soft key changes to "Stop"
3. When the timer is running, you can press the left soft key
or to stop the timer
- If the timer is running, press
press to return to idle state, with the timer continuing to run. If
the timer is stopped and has a non-zero value, press
return to the Clock menu, or press
the value saved
4. To reset the timer (a non-zero value), press the left soft key
(Reset)

11.3 Countdown

If a countdown is running. the
has expired
When a countdown expires, the phone will sound the countdown ring
tone, and a note with the "Countdown" title will appear. The body of the
note contains the duration for which the countdown was set. The alarm
will sound for two minutes and the note will remain on the screen
unless you dismiss it
If the ringer volume is zero, or the master volume is "Off", no
countdown ring tone will be played, however, the countdown expiry
note will be displayed when the preset countdown duration expires; if
the master volume is "Off + Vibrate", the phone will vibrate; if the
master volume is "On + Vibrate", the phone will first vibrate and then
play the ring tone
Press the left soft key (Dismiss) or
and return to the state in which the note appears
76
to return to the Clock menu, or
to return to idle state, with
annunciator is displayed until the event
to silence the ring tone
(Stop)
to