UTStarcom C1100 User Manual page 81

After an alarm sounds, the alarm annunciator
display, unless the alarm is repeating, in which case it remains on the
screen
If the phone is off when the alarm time expires, nothing will be
displayed when the phone is powered back on
When the alarm time expires, if a call is ongoing, a simple tone is
played through the earpiece or earphone (whichever the voice channel
is playing through) instead of the assigned ring tone. The simple tone
will be repeated once
A new alarm has priority over an old alarm. If an alarm is ringing, and a
new one interferes, the new alarm's sound plays. However, once you
dismiss the new alarm, the old alarm continues to play until the total
time is two minutes, including the time it was playing before the
interference that it has been playing
To set a new alarm or revise an existing alarm:
1. After accessing the clock application, select Alarm Clock. There are
three alarms you can set. All three alarms are uninitialized upon factory
installation and "None" is displayed on the screen
- Once the alarm is initialized, there is no way to return to the
uninitialized state
- If the alarm has been initialized, the right soft key
off/Turn on) appears as long as the alarm time is in the future. The
item contains an icon (√ means the alarm is on and × means the
alarm is off), a date (as per the date format), a separator (@) and a
specified time. Press the right soft key
between the alarm on/off states
2. Select an item and then press
- The cursor is placed at the first character of the Time field
3. To set the date (as per the date format), press
Date field, and then press the
Clock Application
is removed from the
(Turn
(Turn on/off) to switch
to set the alarm
to highlight the
- keys to enter the date
73