Call Waiting; Keyguard - UTStarcom C1100 User Manual

To silence the ring tone/vibrator, press the Silence soft key. The
display still shows the call as if the call is still ringing. Therefore, the
call is still active and you can still answer the phone call. Only once the
call has been rerouted to voicemail or the incoming signal is
terminated does the phone return to idle state

2.8 Call Waiting

Call waiting requires network support and may vary depending on the
network. Contact your local service provider for assistance
While you have a call in progress, if there is an incoming call from the third
party, the earpiece will sound a waiting tone. You can press
answer the call

2.9 Keyguard

The Keyguard state prevents the keys from being accidentally pressed,
resulting in unintentional operations. When Keyguard is on, the left soft
key Unlock appears in idle state
To access and display the Keyguard state, press and hold
idle state. A note is displayed for 10 seconds, stating all key presses
will be ignored when Keyguard is on
To unlock the Keyguard state, press the left soft key
and then press #
In the Keyguard state,
- When any key except the left soft key
note appears, prompting you to press the left soft key and the
key to unlock Keyguard
- When the left soft key
prompting you to press the
Note:
Basic Operations
(Unlock)
(Unlock) is pressed, a
(Unlock) is pressed, a note appears,
#
key to unlock Keyguard
to
in
#
21