UTStarcom C1100 User Manual page 62

Settings Application
such as incoming calls, new messages/pages and alarm, countdown,
notes, and so on. Master volume affects all sounds except for voice
You can also access this option by pressing and holding
state. Refer to "Master Volume Control" on page 23
Press to select the desired option then press
selection
The radio button before the current sound effect is selected
The following options are available:
On: The phone will play ring tone for events
Off: The phone will neither play ring tone nor vibrate for events
On + Vibrate: The phone will first vibrate and then play ring tone for
events
Off + Vibrate: The phone will vibrate for events
Default: On
By the master volume, you can turn on the phone vibrator. The vibrator
applies only to ring tones/alerts. The volume can be on or off, and the
vibrator, independently, can be turned on or off. When the volume is off
but the vibrator is on, the phone is in "Vibrate" mode and the vibrate
annunciator appears. When both the volume and the vibrator are off,
the phone is in "Silent" mode, and the silent annunciator
These two annunciators are mutually exclusive
8.1.3.2 Ringer Volume
Settings Sound Volumes
You can also access this option by pressing
Refer to "Ringer Volume Control" on page 22
Ringer volume controls volume control for currently selected ring tones
and missed call notes, battery, call origination failed, call dropped
notification sounds played through the speaker. It excludes voice(s)
54
from idle
to confirm the
appears.
Ringer Volume
or in idle state.