Gas Connection - eka EKF 711G UD Original Operating And Instruction Manual

Convection gas oven _ rev. 2__________________________ MODD. EKF 711G UD – EKF 664G UD – EKF 616G UD
Installation / connection layout

2.7 Gas connection

Before installing, make sure that the oven is designed for use with the available gas. If it is not,
consult paragraph "Adaptation to other gas" or contact the manufacturer's technical assistance
service.
Connection to the gas mains must be made according to the current national norm and
subsequent amendments.
The oven gas connection is R 1/2; this entry section must not be reduced.
_________________________________________________________________________________________ page. 11
4 WATER OULET TUBE (DN 30)
6 SOFTENED WATER INLET (THREADED ELECTROVALVE 3/4")
8 STEAM EXHAUST
9 CABLE GLAND FOR POWER SUPPLY
10 WARNING HOT SURFACE
11 DO NOT OBSTRUCT VENTS
16 GAS INLET (THREADED JOINT 1/2")
Fig. 3 (Dimensions in mm.)