Starting and stopping Historical Server on Windows NT
Starting and stopping Historical Server on Windows
NT
36
•
Adaptive Server
To stop Historical Server on a UNIX platform:
1
Connect to Historical Server. If you are using
isql [ -Uhs_superuser_name -Phs_superuser_password ]
-Shistorical_server
where:
•
superuser_name is the name that was used with the
the Historical Server start-up command. If
up command, any user can stop Historical Server, and the
parameter in this
•
superuser_password is the password that was used with the
parameter to the Historical Server start-up command. If
used in the start-up command, any user can stop Historical Server, and
this parameter is optional.
•
historical_server is the name of the Historical Server you want to
stop.
2
To determine current activity on Historical Server, issue the following
command when the
1> hs_status activity
2> go
3
To shut down Historical Server, issue one of the following commands:
1> hs_shutdown
2> go
or:
1> hs_shutdown no_wait
2> go
This section describes how to start and stop Historical Server running on
Windows NT platforms. Topics are:
•
Starting Historical Server on Windows NT
command is optional.
isql
prompt appears:
isql
, the command is:
isql
parameter to
-U
was not used in the start-
-U
-U
-P
was not
-U
Historical Server