User's Guide
or, for NT 3.5.1:
\\HKEY_USER
and select the correct user entry.
3
Save or print the existing settings before proceeding. From the registry
menu, select the Save Subtree As command or the Print command.
4
In the tree view, highlight:
\SOFTWARE\SYBASE\Server\
srvrName\Parameters
where srvrName is the name of the server whose start-up parameters you
want to change.
On the right side of the window, review the list of existing start-up
parameters which appear in this format:
Argx, dataType, parameter
where:
•
x is an integer in sequential order.
•
dataType defines the type of data in the parameter value.
•
parameter is a start-up option, preceded by a dash and followed by the
parameter value.
An example containing the Historical Server
parameters follows:
Arg0:REG_SZ:-Dc:\sybase\data\hs_data
Arg1:REG_SZ:-Uhssuper
Arg2:REG_SZ:-Pxwdfr
5
To add a new start-up parameter:
•
Select Edit | Add Value.
•
In the resulting dialog box, in the Value Name box, enter
x is the next integer not currently assigned.
•
From the Data Type drop-down list, choose
•
In the resulting String dialog box, enter the parameter and value.
6
To modify existing parameters:
•
Double-click the parameter line you want to change.
•
In the resulting String dialog box, change the entry.
CHAPTER 2
Configuring Historical Server
,
-D
, and
start-up
-U
-P
x where
Arg
.
REG_SZ
19