Table of Contents
Advertisement
Creating a .bat file (optional)
User's Guide
This task allows you to start Historical Server by executing a batch file, rather
than by using the services icons.
To prepare for Historical Server start-up from a batch file:
1
Start any text editor and open a new text file.
2
Enter the Historical Server start-up command,
parameters. Use the full path name of the start-up command histsrvr.exe.
See "Inferring start-up parameters from the NT Registry" on page 37 for
precedence rules used by Historical Server to obtain start-up parameters.
See "Setting Historical Server start-up parameters" on page 20 for
explanations of start-up parameters.
An example line in the .bat file follows. The example has carriage returns
inserted in the command. Do not put carriage returns in your .bat file. The
entire file should be one line.
c:\sybase\bin\histsrvr.exe -Shs_server1
-Dc:\sybase\data\hs_data
-Ic:\sybase\ini\sql.ini
-lc:\sybase\data\hs.log
3
Save the file with a .bat extension. Sybase recommends that you use RUN_
hsName.bat. For example:
RUN_hs_server1.bat
CHAPTER 2
Configuring Historical Server
histsrvr
, and all desired
31
Advertisement
Table of Contents
