Sybase 12.5.1 User Manual page 84

Historical server
Table of Contents

Advertisement

hs_create_recording_session
70
year/month/day
The default is to start immediately. The following time zone options are
available:
Parameter value
Explanation
EST
U.S. eastern time zone, standard time.
EDT
U.S. eastern time zone, daylight saving time.
CST
U.S. central time zone, standard time.
CDT
U.S. central time zone, daylight saving time.
MST
U.S. mountain time zone, standard time.
MDT
U.S. mountain time zone, daylight saving time.
PST
U.S. Pacific time zone, standard time.
PDT
U.S. Pacific time zone, daylight saving time.
MET
Middle European time zone, standard time.
MET DST
Middle European time zone, daylight saving time.
WET DST
Western European (Greenwich) time zone, daylight
saving time
GMT
Greenwich mean time. This is equivalent to western
European (Greenwich) time zone without regard to
daylight saving time. All of the preceding time zone
specifications, such as EST or EDT, can be supplied only
in combination with dates and times when standard time
or daylight savings time is in effect. GMT can be paired
with any date and time specification.
{
}
To specify any other time zone, where hours_offset is the
GMT
+-
hours_offset
number of hours that must be added to Greenwich mean
time to derive the local time. The acceptable range of
offset values is between +24 and -24 hours, inclusive.
Fractional offsets such as +5.5 are valid.
If you do not specify a time zone, the local time zone of the Historical
Server is used.
The start_time cannot be more that 31 days from the present time.
end_time
time at which recording is to stop. The default is to stop the recording
session 24 hours after the start_time. If you specify an end_time and do
not specify a start_time, the start_time defaults to the present.
hour:minute[:second]
[time zone]
Historical Server

Advertisement

Table of Contents
loading

Table of Contents