Table of Contents
Advertisement
Configuring multiple instances of Historical Server
26
Leave the Class box blank.
7
In the tree view, highlight:
\SOFTWARE\SYBASE\Server\hsName
where hsName is the new Historical Server name.
8
Select Edit | Add Value.
9
In the resulting dialog box, in the Value Name box, enter:
ServerType
From the Data Type drop-down list, choose:
REG_SZ
In the resulting String dialog box, enter:
HISServer
10 Make sure the entry for the new Historical Server name remains
highlighted.
11 Select Edit | Add Key.
12 In the Key Name box, enter:
Parameters
Leave the Class box blank.
13 In the tree view, highlight:
\SOFTWARE\SYBASE\Server\hsName\Parameters
where hsName is the new Historical Server name.
14 Select Edit | Add Value.
15 In the Value Name box, enter:
Arg0
From the Data Type drop-down list, choose:
REG_SZ
In the resulting String dialog box, enter:
-ShsName
where hsName is the Historical Server name.
16 Repeat steps 13 through 15 until you have entered all of the start-up
parameters for Historical Server.
Historical Server
Advertisement
Table of Contents
