Setting The Limiter - Zoom H3-VR Operation Manual

Setting the limiter

The limiter can prevent distortion by reducing input signals that have excessively high levels.
When the limiter is ON, if the input signal level exceeds the set threshold value, the input signal level will be sup-
pressed to prevent the sound from distorting.
The amount of time after the input signal exceeds the threshold until compression of the output signal is maxi-
mized is called the "attack time". The amount of time after the input signal goes below the threshold until the lim-
iter stops compressing the signal is called the "release time". Change these two to adjust the audio quality.
1.
Press .
This opens the Menu Screen.
2.
Use and
Level
Threshold
to select "Input/Output", and press
Input signal
Signal after
limiter
Attack Release
time time
40
Time
.