Please keep these instructions.
The combination of this lock has been factory
preset: 2 and 4 pressed together, then 3.
WARNING
For your own safety, you must change the
combination at the time of installation.
PLEASE READ AND FOLLOW ALL
DIRECTIONS CAREFULLY
Since every installation is unique, carefully
check windows, frame, door, etc. to ensure
that the recommended procedures will not
cause damage. Ilco Unican is not responsible
for any damage caused by installation.
Tools Required
⁄
1
•
" (6 mm) Drill Bit
4
• 1" (25 mm) Wood Chisel
⁄
3
•
" (19 mm) Hole Saw
4
• Phillips-head Screwdriver
• 1" (25 mm) Drill Bit or Hole Saw
⁄
3
• 1
" (35 mm) Hole Saw
8
• 2 Pairs of Pliers
• Hacksaw
• Hammer
• Center Punch
• Drill (variable speed)
2