Table of Contents
Advertisement
Introduction
The NLS-EM2037 OEM scan engines (hereinafter referred to as "the EM2037" or "the engine") are armed with CMOS
image capturer and the Newland patented
scanning and accurate decoding on barcodes on virtually any medium-paper, magnetic card, mobile phones and LCD
displays. The EM2037 can be easily integrated into OEM equipment or systems, such as handheld, portable, or stationary
barcode scanners. The EM2037 offers fully open image acquisition interface, raw data interface and I/O interface, which
enable users to easily develop their own applications with Newland's SDK.
※ Note: This guide provides general instructions for the installation of the engine into a customer's device. Fujian
Newland Auto-ID Tech. Co., Ltd. recommends an opto-mechanical engineer should conduct an opto-mechanical analysis
before integration.
Chapter Description
Chapter 1, Getting Started
Chapter 2, Installation
Chapter 3, Electrical Specifications
Chapter 4, Interfaces
Chapter 5, Auxiliary Tools
Explanation of Symbols
•
This symbol indicates lists of required steps.
※ This symbol indicates something important to the readers. Failure to read the notice will not lead to harm to the reader,
device or data.
△
！
This symbol indicates caution that, if ignored, may cause data or device damage or even personal injury.
1
About This Guide
, a computerized image recognition system-on-chip, featuring fast
Gives a general description of the EM2037.
Describes how to install the engine, including installation information, housing
design, optical, grounding, ESD, and environmental considerations.
Lists the electrical characteristics for the engine.
Includes interface pinout, connector specifications and timing sequences.
Introduces useful tools you can use to test and evaluate the EM2037 as well as
conduct secondary development.
TM
Advertisement
Table of Contents
