Configuring Power Saving Function Settings; Returning The Watch To Its Factory Default Settings; Moving To Another Time Zone - Casio 3461 User's Operation Manual

Configuring Power Saving
Function Settings
1.
Hold down (A) for about two seconds until
[HT] flashes.
2.
Press (C) 14 times.
This displays [POWER SAVING].
3.
Press (D) to toggle the setting between
enabled (on) and disabled (off).
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
4.
Press (A) to exit the setting screen.
Note
For details about Power Saving, refer
●
to the information below.
Power Saving Function
l
Returning the Watch to Its
Factory Default Settings
This section explains how to return the watch
settings below to their initial factory defaults.
Watch Settings
●
Reminders
●
Alarm
●
Stopwatch
●
1.
Hold down (A) for about two seconds until
[HT] flashes.
Operation Guide 3459/3461
2.
Press (C) twice.
This causes the seconds to flash.
3.
Hold down (B) for about seven seconds.
Hold down the button until [ALL] stops
flashing on the display.
Moving to Another Time
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
Before Boarding
●
1.
Configure the World Time to the current
time at your destination.
Using G-SHOCK Connected to
l
Configure Settings
Using Watch Operations to Configure
l
Settings
2.
Disable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
Seconds
Zone
Destination time
Current time
In the aircraft, before arriving at your
●
destination
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping After swapping
Destination time
Destination time
Using G-SHOCK Connected to
l
Configure Settings
Using Watch Operations to Configure
l
Settings
After Arriving
●
1.
Adjust the time setting.
Triggering Immediate Time
l
Adjustment
2.
Enable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
17