Using The Watch In A Medical Facility Or Aircraft; Using Mobile Link With A Mobile Phone; Getting Ready; A Install The Required App On Your Phone - Casio 3461 User's Operation Manual

Home City
Summer time
Seconds
Hours
Minutes
Year
Month
Day
12/24-hour timekeeping
Date display format
Day of the week language
Operation tone enable/disable
Illumination duration
Auto adjust
Power Saving
3.
Configure the date and time settings.
To reset the seconds to 00: Press (D).
●
1 is added to the minutes when the
current count is between 30 and 59
seconds.
Use (D) and (B) to change the other
●
settings.
4.
Repeat steps 2 and 3 to configure the
other settings.
5.
Press (A) to exit the setting screen.
Operation Guide 3459/3461
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive or connection with a phone may cause
problems, you can perform the procedure
below to disable it. To re-enable auto time
adjustment, perform the same operation
again.
1.
Hold down (A) for about two seconds until
[HT] flashes.
2.
Press (C) 13 times.
This displays [RECEIVING].
3.
Press (D) to select the auto time
adjustment setting you want.
[OFF]: Auto time adjustment disabled.
[On]: Enable auto time adjustment.
4.
Press (A) to exit the setting screen.
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while G-
●
SHOCK Connected is running on the
phone.
This section describes watch and
●
phone operations.
X : Watch operation
Y : Phone operation

Getting Ready

A Install the required app on your
phone.
In Google Play or the App Store, search for the
CASIO "G-SHOCK Connected" app and
install it on your phone.

B Configure Bluetooth settings.

Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.

C Pair the watch with a phone.

Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y On the Home Screen, tap the "G-
SHOCK Connected" icon.
3.
Y Perform the operation shown on the
phone screen to be paired with.
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
If pairing fails for some reason, [NG] or
●
[ERR] will appear on the display
momentarily and then the timekeeping
screen will appear. Perform the pairing
procedure again from the beginning.
Pairing started. Pairing complete.
Note
The first time you start up G-SHOCK
●
Connected, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
7