Honeywell GMPT-401-C1D2 User Manual page 43

GMPT-401 Personal Tracker User Guide
To change the battery:
1 On the back of the tracker, remove the rubber screw caps with a small sharp
object and remove the 7 screws.
2 Remove the back cover to access the battery.
3 Remove the old battery and replace with the new battery (make sure the
orientation is correct).
4 Inside the back cover, remove the rubber seal and replace with the new one.
5 Place back cover on the tracker, making sure the SOS button is in place.
6 Secure the back cover with the 7 new screws and fit the screw caps.
Chapter 4 — Maintenance and Security
37