Honeywell GMPT-401-C1D2 User Manual page 35

GMPT-401 Personal Tracker User Guide
Alert Report Rate
Default
Settings
Reporting Interval 2 minutes
GPS Acquisition 1X
Mailbox Check 1X
Note: * Limited to a minimum of 1 minute between acquisitions/checks. For
example, if the Reporting Interval is to 1 hour and the Mailbox Check is set to
4X per interval, then the mailbox will be checked every 15 minutes.
To modify Connection Interval settings:
1 Go to Setting, Connection Interval. Touch the setting you want to change.
2 Select the new configuration.
3 Go back to the Connection Interval menu and touch another setting you
want to change. Continue until you have made all the changes desired.
4 When all changes have been made, touch Send in the upper right corner of
the screen.
Chapter 3 — Operation
Range
From 2 minutes to 24 hours.
From 1 to 128 times per interval *.
This specifies how often the GPS position
is updated in between reporting intervals.
From 1 to 128 times per interval *.
This specifies how often the tracker will
check for new messages in between
reporting intervals.
29