Advertisement
I N S T A L L A T I O N I N S T R U C T I O N S
(1) FSB Interface Bracket
(4) M4 x 6mm Phillips Pan Head Screws
(4) .50" Diameter Rubber Bumper
BEFORE PROCEEDING: Unpack the carton, verify contents shown in Figure 1 and read
installation instructions completely. If you are missing any of the listed components, please
contact Customer Service at 1-800/582-6480.
CAUTION!
1. Attach the four (4).50" Diameter Rubber Bumpers to the four (4) "X" location markings
located on the Interface Bracket (see Figure. 2).
2. Interface installation
**If used with any small flat screen system using Chief Manufacturing's Q2 (5" x 5") mounting system.
2a. Using 1/8" Hex Key, assemble (4) mounting buttons to 5" hole pattern on the adapter bracket with the
four (4) 10-24 x .50" Button head cap screws (see Figure 3).
DISPLAY STATIC MOUNT
FSB-4225
Displays are Extremely Fragile.
Figure 2
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
Figure 1
(4) Tapped Mounting Buttons
(4) 10-24 x .5 Button Head Cap Screw
"
(4) 1/8
Hex Key
Figure 3
8804-000206 REV. A
2004 Chief Manufacturing
www.chiefmfg.com
10/04
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CHIEF FSB-4225
Summary of Contents for CHIEF FSB-4225
- Page 1 Interface Bracket (see Figure. 2). 2. Interface installation **If used with any small flat screen system using Chief Manufacturing’s Q2 (5” x 5”) mounting system. 2a. Using 1/8” Hex Key, assemble (4) mounting buttons to 5” hole pattern on the adapter bracket with the four (4) 10-24 x .50”...
- Page 2 **Optional VESA Mounting 2b. Attach Interface bracket to Display Screen (see Figure 4). 2c. Using four inside tapped holes of interface bracket and M4 x 6mm Phillips Screws (provided), secure adapter bracket to any mounting device using a 100mm x 100mm VESA pattern. Figure 4...
Need help?
Do you have a question about the FSB-4225 and is the answer not in the manual?
Questions and answers