Product- And Technology-Related Safety Messages; Operator's Obligations - Aventics Marex 3D Assembly Instructions Manual

AVENTICS | Marex 3D | R417003106–BDL–001–AA
Observe the safety instructions and guidelines of the
country in which the product is used.
Only use AVENTICS products in technically perfect condition.
Check the product for obvious defects as for example cracks
in the housing or missing screws, caps or sealings.
You must not modify or convert the 3D Controller.
Persons who install, operate, dismantle or maintain
AVENTICS products must not be under the influence of
alcohol, other drugs or medications which affect the
responsiveness.
Incorrect assembly, unintended use or inappropriate
handling will invalidate the warranty.
Only use original accessories and spare parts.
Under no circumstances the product may be subjected to
mechanical load. Never use the product as a handle or step.
Do not place objects on the product.
2.6 Product- and technology-related safety
messages
NOTICE! We point out that the 3D Controller may only be taken
into operation after it has been ascertained that the propulsion
system into which the 3D Controller shall be installed
corresponds to the regulations of the applicable national rules
or classification rules for ships.
Mounting work and initial operation must only be performed
by qualified personnel as per chapter 2.4, Personnel
qualifications.
Follow the instructions in chapter 7, Assembly, to mount the
3D Controller professionally.
Check the installation site for possible causes of accident
and eliminate those before the assembly.
2.7

Operator's obligations

Installation and maintenance work is subject to the country-
specific safety regulations and standards of the application. As
9
Safety instructions