Delivery Check; Product Storage - Aventics Marex 3D Assembly Instructions Manual

3d controller
Hide thumbs Also See for Marex 3D:
Table of Contents

Advertisement

14
AVENTICS | Marex 3D | R417003106–BDL–001–AA
Transport and storage
Maximum storage period
6.2

Delivery check

Check the supply immediately on receipt for completeness
and transport damage.
Proceed as follows if any visible damage is discovered
during receipt of delivery:
– Do not accept the delivery or only under reservation.
– Note the extent of damage on the transportation
documents or the delivery note.
– Submit a claim.
6.3

Product storage

Do not destroy the packaging and only remove it shortly
before installation.
Adhere to the following conditions for storage:
– Only store the 3D Controller in its original packaging.
– Do not store the 3D Controller outside.
– Store the packages in a dry and dust-free place.
– Do not expose the packages to aggressive media.
– Protect the packages against solar radiation.
– Observe the admissible storage temperature of
248 to 358K (-25°C to +85°C), see also chapter 11,
Technical data.
Avoid mechanical impact.
Make sure all M12 protective caps are applied.
The 3D Controller may be stored for 2 years at maximum. The
storage period will be prolonged if the 3D Controller is
connected to the power supply from time to time.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Marex 3D and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents