Table of Contents
Advertisement
AVENTICS | Marex 3D | R417003106–BDL–001–AA
8
Maintenance and repair
8.1
Cleaning
Cleaning of the 3D Controller is not required.
8.2
Inspection
Connections might loosen after a period of time. Check the
3D Controller at regular intervals for visible damage and loose
screws. Refasten the screw connections if necessary.
NOTICE! Do not attempt to repair a damaged 3D Controller
yourself. Replace the 3D Controller in case of visible defects.
Contact Aventics for support if necessary.
8.3
Maintenance
The 3D Controller does not require maintenance.
Maintenance and repair
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Marex 3D and is the answer not in the manual?