Figure 6-12. Microphone Re-Assembly; Figure 6-13. Speaker Re-Assembly - Motorola EP450 Basic Service Manual

6-10 Display Model Disassembly and Re-assembly: Disassembling and Re-assembling the Radio — General
4. Locate the speaker tab and align it with the tab opening in the front housing
5. Insert the speaker tab into the speaker recess in the housing. Ensure the speaker is seated flush
in the housing.
Note: Make sure the speaker and microphone wires are routed tightly between the speaker basket
6. Insert one end of the speaker retainer into the slot in the front housing (See
Speaker Retainer
Speaker
Front Housing Slot
Note: When fastening the speaker retainer screw, make sure the wires are out of the way to pre-
7. Install the retainer screw using a T6 Torx screwdriver. Torque to 2.3 - 2.5 lb/in.
December 3, 2003
More user manuals on

Figure 6-12. Microphone Re-assembly

and the housing post.

Figure 6-13. Speaker Re-assembly

vent pinching by the retainer.
ManualsBase.com
Microphone
Boot
Microphone Recess
Speaker Tab
Tab Opening
Microphone Position
(Figure 6-13).
Figure 6-13).
HKLN4215A