Disassembling And Re-Assembling The Radio - General; Radio Disassembly - Detailed; Front Cover From Chassis Disassembly; Figure 7-1. Battery Removal - Motorola EP450 Basic Service Manual

Non-Display Model Disassembly and Re-assembly: Disassembling and Re-assembling the Radio — General
7.4 Disassembling and Re-assembling the Radio — General
Since these radios may be disassembled and re-assembled with the use of only four (board to
casting) screws, it is important to pay particular attention to the snaps and tabs, and how parts align
with each other.
The following tools are required for disassembling the radio (see 3.2 for a list of service aids):
•
•
•
If a unit requires more complete testing or service than is customarily performed at the basic level,
send this unit to a Motorola Authorized Service Center. See Appendix B for a list of authorized service
centers.
The following disassembly procedures should be performed only if necessary:
•
•
•
7.4.1 Radio Disassembly — Detailed

7.4.1.1 Front Cover From Chassis Disassembly

1. Turn off the radio
2. Remove the battery
HKLN4215A
More user manuals on
knob remover/chassis opener
penknife-size screwdriver
TORX™ T6 screwdriver
Chassis Disassembly
Speaker Disassembly
PTT Disassembly
(Figure
a. Slide the battery latch into the unlock position. Disengage by pushing downward and
holding the latch towards the front of the radio.
b. With the battery latch disengaged, slide the battery down from the top of the radio about
1/2 in. Once the battery is free from the battery rails, lift it directly away from the radio.
c. Remove the battery from the radio.
Lock
Unlock
Battery Latch
ManualsBase.com
7-1):

Figure 7-1. Battery Removal

7-3
December 3, 2003