Disassembly/Reassembly
Remove the Main Board
Figure 3-5.
5.
Pull the chassis out and away from the housing as
shown by the arrow in Figure 3-5.
Remove the Main Board
1.
The main board is sandwiched between the front
shield and the chassis. Four chassis clips hold the
sandwiched assembly together. Remove the chassis
gasket and place the radio shield side down on a
flat surface.
2.
Using a small flat blade screwdriver, unlock the
four chassis clips while pressing down on the chas-
sis directly above each clip. (Refer to Figure 3-6.)
Figure 3-6.
3-2
Flex Cable
MAEPF-25237-O
Chassis Clips
3.
After all four chassis clips have been removed,
separate the main board from the chassis as shown
in the exploded view Figure 3-7.
Re-assembly of Radio
Reverse the disassembly procedure.
Be sure to reinstall the chassis gasket. This
gasket helps keep the main board free of
unwanted dirt, dust, and water.
6880904Z07-O
GP350 Portable Radio Service Manual
Figure 1-7.
Figure 3-7.
MAEPF-25239-O
IMPORTANT
August, 1996