Triggering Emergency; Exiting Man Down Feature; Re-Initiating Man Down - Motorola APX 3000 Quick Reference Card

Triggering Emergency

When you have not clear the Man Down condition and the Post-
Alert Timer comes to an end, Emergency Alarm or call is
triggered. Your radio sends emergency message to units within
the same Talkgroup. Your radio also sends ID number and GPS
coordinates to your dispatcher if these features are enabled.
You can exit Emergency following the Emergency procedure.
See Emergency Operation†‡ on page 35 for details.
Note: At this point the Man Down features is complete. Use
normal Emergency procedures to cancel Emergency
transmissions.

Exiting Man Down Feature

If you are not in a real Man Down situation, you should exit the
Man Down feature and prevent emergency from going off with
the following operation.
Procedure:
Repositioning your radio or shaking your radio (when motion
sensitivity is enabled).
OR
Press the preprogrammed Man Down Clear button to exit.

Re-Initiating Man Down

After exiting the Emergency Operation when your radio is still in
Man Down condition (tilted achieving threshold angle or
motionless), you must first exit Man Down condition to then re-
initiate the Man Down feature.
Procedure:
Return your radio to the vertical position
OR
Shake your radio (when motion sensitivity is enabled).
41
English