6-8
Display Model Disassembly and Re-assembly: Disassembling and Re-assembling the Radio — General
6.4.1.6 Chassis Disassembly
CAUTION: Refer to the CMOS CAUTION paragraph (see 3.3) before removing the main board. Be sure
!
to use Electrostatic Discharge protection when handling circuit boards.
1. Remove the O-ring.
2. Use a Torx™ screwdriver with a T6 bit to remove the four screws
board to the chassis.
.
3. The audio jack shroud can be removed from the main board.
December 3, 2003
More user manuals on
Hooks
PTT Seal
Figure 6-9. PTT Removal
Figure 6-10. Removal of Main Board from Chassis
ManualsBase.com
Tab
Tab
Audio Jack Shroud
Flat Blade
Screwdriver
(Figure
6-10) holding the main
Main Board
Radio Chassis
O-Ring
HKLN4215A