Figure 2-2.
2.
3.
4.
Installing a Plastic Chassis in a Rack
The plastic chassis requires different rack mounting brackets. The plastic chassis
rack mounting brackets use slots in the sides of the chassis. Determine which
position you want for the switch in the rack and select the appropriate slots (see
Figure 2-1
To install a plastic chassis in a rack, follow these steps:
1.
893-01010-A
Installing metal chassis in rack
Position the switch in the rack and align the holes in the mounting
bracket with the holes in the rack (see
Insert two screws, appropriate for your 19-inch rack, into each of the
mounting brackets and tighten (see
To continue installation, go to
on
page
2-7.
on
page
2-4).
Locate the appropriate mounting slots on both sides of the switch (see
Figure
2-3).
Installing the BayStack Switches
7529FB
Figure
2-2).
Figure
2-2).
"Completing Rack Mounting
Installation"
2-5