Selecting A Language - Bay Networks BayStack 303 User Manual

Using the BayStack 303 and 304 Ethernet Switches
Table 2-1.
Parameter
Forward Delay
Max Age
Bridge Priority
Port Priority
Port Path Cost
Trap Receiver # Community Name and
IP Address (1, 2, 3, & 4)

Selecting a Language

The BayStack 303 and 304 switches are designed to interface with the user in one
of seven languages. Selection of a user interface language is done from the
language menu, shown in
initial power-up sequence and whenever the system is reset to default values. At
all other times, the Main Menu is displayed when the switch is turned on.
To select a language for the user interface, enter the number corresponding to the
chosen language and the Main Menu is displayed in the selected language.
1 ---English
2 ---French/Francais
3 ---German/Deutsche
4 ---Japanese
5 ---Spanish/Espanol
6 ---Italian/Italiano
7 ---Chinese
Current Selection:
Please enter number for selection:
Figure 2-8.
2-16
Factory default settings (continued)
Figure 2-8. The language menu is displayed at the
Language selection menu
Default value
15 seconds
20 seconds
32768
128
0
Public - 0.0.0.0
893-01010-A