4
PROCEDURE BEFORE OPERATION
This chapter shows the procedure before operation of a C intelligent function module.
1.
Mounting modules on a base unit
Do not use an electric screwdriver to attach and remove module fixing screws.
2.
Inserting an SD memory card (Page 33 Inserting and removing an SD memory card)
Insert an SD memory card if necessary.
3.
Turning the power of the system ON
4.
Parameter settings ( Page 23 Setting Parameters)
Set parameters with an engineering tool.
5.
Resetting the system
Check the RUN LED and ERR LED. If an error occurred, take corrective actions following the troubleshooting. (MELSEC
iQ-R C Intelligent Function Module User's Manual (Application))
6.
Creating a user program (Page 25 Creating User Program)
7.
Resetting the system
8.
Executing the program
9.
Starting operation
4 PROCEDURE BEFORE OPERATION
22