Setting parameters
This section shows the parameter setting required for the operation example.
■Adding new module
Add an C intelligent function module to the project created by using an engineering tool and set parameters. (Page 23
Parameter settings)
Operating procedure
1.
Open the "Add new module" screen.
[Navigation window] [Parameter] right-click [Module Information] [Add New Module]
2.
Add a C intelligent function module in the "Add New Module" screen.
[Module Type] [Information Module], [Module Name] [RD55UP06-V]
3.
Set the module parameter of the C intelligent function module.
Use the initial parameters when adding modules in the operation example.
For details on the parameters, refer to the following manual.
MELSEC iQ-R C Intelligent Function Module User's Manual (Application)
4.
Write the parameters to the CPU module, and reset the CPU module, or turn the power OFF and ON.
[Online] [Write to PLC]
7 OPERATION EXAMPLES
7
39