4.1
Setting Parameters
Set parameters with an engineering tool.
Parameters can be set in CW Configurator with the following procedure.
However, the settings regarding program language and module labels are not available.
Startup method
Operating procedure
1.
Start an engineering tool.
[MELSOFT] [GX Works3] [GX Works3] from Windows
*1 Select [All apps] on the Start screen or [Start] [All Programs].
Parameter settings
Operating procedure
1.
Create a new project.
[Project] [New] from the menu
2.
Select "Series", "Type", and "Program Language" and click the [OK] button.
3.
Set whether to use module labels, click the [OK] button.
4.
The "Add New Module" screen appears.
[Navigation window] [Parameter] right-click [Module Information] [Add New Module]
*1
Start
4 PROCEDURE BEFORE OPERATION
23
4.1 Setting Parameters
4