Table of Contents
Advertisement
13 Initial use
devolo dLAN 1200 triple+
3.3 Connecting the dLAN 1200 tri-
ple+
CAUTION! Damage to the device caused by
ambient conditions
Only use device indoors in dry conditions
In the following sections we describe how to connect
the dLAN 1200 triple+ and integrate it into the net-
work. We clarify the exact procedures based on poten-
tial network scenarios.
For the permitted voltage range for operating
the device and the power consumption, refer to
the label on the rear of the device. For addition-
al technical information on our products, refer
to the Service Centre area at www.devolo.com.
3.3.1 Starter Kit – Setting up a new dLAN
network
Connect the dLAN 1200+ to your Internet access
device's network jack (e.g. WiFi router).
CAUTION! Tripping hazard
Lay the network cable in a barrier-free
manner and ensure that the electrical
socket and the connected network devices
are easily accessible
Plug the dLAN 1200 triple+ into a wall socket. As
soon as the LED indicator light flashes red at regu-
lar intervals of 0.5 sec., the adapter is ready to
operate but not yet integrated into the dLAN net-
work.
Connecting the dLAN 1200+ and dLAN 1200 tri-
ple+ to a dLAN network
Before you can use the adapter in a dLAN network, first
you have to connect it as a network. This is accom-
plished by using a shared dLAN password. This forms
a delimited dLAN network. Shared use of the dLAN
password serves both as access control to the dLAN
network as well as the encryption, and thereby the
interception protection, of the transmitted data.
The dLAN password can be set in different ways:
dLAN network encryption:
b
dLAN network encryption: at the touch of a but-
ton: First press the encryption button of the
dLAN 1200+ for approx. 1 second, and then
within 2 minutes press the encryption button of
the dLAN 1200 triple+ for approx.1 second.
or
Advertisement
Table of Contents
